Brother International MFC 9420CN Quick Setup Guide - English - Page 6
Step1 Setting Up the machine, 1 Install the Toner cartridges - drivers
UPC - 012502614074
View all Brother International MFC 9420CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step 1 Setting Up the machine 1 Install the Toner cartridges 4 Take out all the toner cartridges from the machine. Do NOT connect the interface cable. Connecting the interface cable is done when installing the driver. 1 Remove the protective tape. 5 Carefully pull the protective part out of the machine. 2 Open the front cover. 6 Rock the toner cartridge 3 to 4 times. Front cover 3 Remove the protective part. 7 Pull off the tape labeled REMOVE, and then remove the orange protective cover. REMOVE tape Protective cover Go to the next page 4
4
Setting Up the machine
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Remove the protective tape.
2
Open the front cover.
3
Remove the protective part.
4
Take out all the toner cartridges from the
machine.
5
Carefully pull the protective part out of the
machine.
6
Rock the toner cartridge 3 to 4 times.
7
Pull off the tape labeled REMOVE, and then
remove the orange protective cover.
1
Install the Toner
cartridges
Front cover
REMOVE tape
Protective cover
Go to the next page
Step 1