Brother International PT-2030 Users Manual - English - Page 24
Feeding Tape, Feed function, LCD Display, LCD Contrast - not printing
UPC - 012502628033
View all Brother International PT-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
GETTING STARTED Feeding Tape Feed function The Feed function feeds 0.98" (25mm) of blank tape. • Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape. • Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam. 1 Hold down the Shift key and press the Preview key. 2 The message "Feeding Tape... Please Wait" appears while the tape is fed. To exit or cancel this function press Escape. LCD Display LCD Contrast You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1, -2) to make the screen easier to read. The default setting is "0". 1 Press the Setup key to display the Setup menu, select "LCD Contrast" using the or key, and then press the OK or Enter key. 2 Select a contrast level using the or key. The screen contrast changes each time you press the or key, allowing you to set the most suitable contrast. 3 Press the OK or Enter key. • Press the Escape key to return to the previous step. • Pressing the Space key on the contrast setting screen sets the contrast to the default value "0". 18 Feeding Tape