Brother International PT-9500PC Quick Setup Guide - English and Spanish - Page 110
Using multiple computers, Changing the baud rate, Turn off the PT-9500PC.
UPC - 012502607267
View all Brother International PT-9500PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Using multiple computers The PT-9500PC can be used by multiple personal computers as a shared printer. Connect the PT-9500PC to one personal computer and set it up for common use. The PT-9500PC can then be used as a network printer by personal computers in the same network. This function can only be used in a Windows environment. Changing the baud rate The serial interface baud rate is set to 115,200 bps at the factory. When using a personal computer that does not support a serial port baud rate of 115,200 bps, change the PT-9500PC baud rate to 9,600 bps. Note ● After changing the PT-9500PC's baud rate to 9,600 bps, change the personal computer baud rate as well. For details, refer to "Setting the personal computer and PT-9500PC baud rate" (→ P.45). Turn off the PT-9500PC. 1 With the PT-9500PC power off, press the 2 power button on the PT-9500PC for 5 seconds or more. Ether HUB Power button Ether cable USB cable or serial cable Note ● The common-use settings for the printer vary according to the operating system running on the personal computer and the LAN environment. For details, refer to the instruction manual for the personal computer. →The ERROR lamp (red) and power button lamp (green) will flash alternately. After the lamps flash alternately, release 3 the power button. →The baud rate is now set to 9,600 bps. Appendix 109