Canon Color imageCLASS MF9170c imageCLASS MF9170c/MF9150c/MF8450c Basic Operat - Page 69

Loading Paper 1 Open the stack bypass tray. 3 Load the paper into the stack bypass tray. - Insert the paper stack as far as it will go. - When you print on paper which has logos or patterns already printed on it), see "Relationship between Original Orientation and Preprinted Paper Output Chart," on p. 2- 24. If the paper size you are going to load into the stack bypass tray is different from the paper size stored in stack bypass tray Standard Settings, set stack bypass tray Standard Settings to 'Off' in Common Settings (from the Additional Functions screen). (See "Setting Paper Size and Type," on p. 2‑20.) 2 Adjust the slide guides to match the size of the paper. ■ Before inserting paper ① When you use the stack bypass tray to make copies, straighten out curled paper prior to use, as shown below. Curled paper may cause a paper jam. If you are feeding large size paper, pull out the auxiliary tray, and extend the tray extension. ② If there is difficulty in straightening out curled paper, curl the front edges of the paper upward, as shown below. Originals and Print Media 2-16