Canon DP-V3120 Video Display Operation Guide - Page 114
Error Messages, Message, Description and Action, CDL/User LUT Bypass is on.
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Error Messages Screen Capture 114 Message Failed to capture. Invalid Signal. Copy protected signal. Hardware error Input signal Operation Failed to playback file. No capture file. Backlight error. Fan error. Panel error. I/F error. System error. Invalid operation due to high temperature. No Signal Unsupported Invalid operation. "Protect Settings" is on. "CDL/User LUT Bypass" is on. Invalid Password. No license. USB memory USB memory is not connected. Unsupported USB memory. Description and Action The USB memory may be defective or protected. Check the USB memory. A screen displaying no video is being captured for example there is no signal or an unsupported signal is being input. Check the signal, input it again, and capture it. The signal you tried to capture may be protected by HDCP 2.2 which is a copy prevention standard for HDMI. In this case, the signal cannot be captured. Check the HDMI signal. The USB memory or the file may be defective or protected. Check the USB memory or the file. Check and ensure that the file has been saved to the USB memory. Disconnect the power cord, reconnect it, and then turn on the power. If the message persists, contact Canon Customer Center. The temperature inside the main unit is high. Turn off the power and wait until the fan stops. Displayed when there is no video signal input. Unsupported video signal is input. Check the supported signal format ( 95). Operation is disabled. Check the setting items. To use the OSD menu, move the selection frame to [Protect] and press the jog dial for approximately 3 seconds. When [CDL/User LUT] [Bypass] is turned [On], you cannot adjust [Power], [Saturation], [Offset], or [Slope]. Enter the correct password. This function cannot be used as the license file has not been applied. Refer to the Canon website for detailed information. Correctly connect the USB memory to the USB port of this main unit. Check the USB memory format and make sure it is not protected.