Canon DP-V3120 Video Display Operation Guide - Page 85
TSL Ver. 5.00, Bottom, Automatic
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
OSD Menu Sub Menu Display Setting Link In Monitor Display Control Position Manual Display Type Manual String Adjustment Channel Adjustment/Channel Off Setting Options (Bold: factory default) Settings are linked between displays connected via LAN. This device's setting values are applied to all linked displays. * Before linking settings, check that the following conditions are met. a Turn on the power to this display and the display(s) to link with, and 85 check that they are all recognized on the network b Change the adjustment or channel and check that the other display(s) also change The devices and firmware versions that can be linked are shown below. DP-V3120: Version 1.0 or higher DP-V2410: Version 1.4 or higher DP-V2420 / DP-V2421: Version 1.3 or higher DP-V1710 / DP-V1711: Version 1.3 or higher DP-V2411: Version 1.2 or higher Displays not connected can be removed with the RESET button. • Operating the GPI* or the buttons on this display will reflect setting value changes in all. Linked operations using Payload ID, HDMI, Camera, etc. will not reflect the settings changes. (* ) • If a display model has functions with different menu settings or setting ranges, some settings will not be correctly exported (settings will not be changed, will revert to factory defaults, etc.) • In an environment where communication cannot be done properly, such as when the network environment is unstable or the bandwidth is insufficient, settings may not link properly. Only connect displays to be controlled to the LAN. If a Display Controller is connected, it may not operate properly ( ). • Up to 32 displays can have their settings linked. • [Bypass] (CDL/User LUT) under [Adjustment] [CDL/User LUT] is not linked. The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate the video display using an external device connected to the LAN terminal and display characters and tally lights on the screen. You can input any characters you like directly from this video display. ( 20) TSL Ver. 5.00 Manual Off Sets whether or not to receive the control signal from the connected device. [Manual]: Select to input the characters on this video display. Does not receive a control signal from the connected device. Top Bottom This sets whether the characters and tally lights will be displayed at the top or the bottom. Automatic Single Dual A,B, Dual C,D Quad A,B,C,D [Automatic]: Changes display in accordance with the Input Configuration. [Single]: Single-screen display. [Dual A,B], [Dual C,D]: Dual-screen display. [Quad A,B,C,D]: Quadruple-screen display. (Single) (Dual/Quad A) (Dual/Quad B) (Dual/Quad C) (Dual/Quad D) (Single Dual L) (Single Dual R) • When [Function Settings] [Signal Monitoring] [Control] is set to [On] then [Manual Display Type] is fixed to [Automatic]. When [Control] [Manual] Sets the characters to display for the selected [Manual String]. You can input up to 16 alphanumeric characters.