Canon DP-V3120 Video Display Operation Guide - Page 84

Network/IMD Settings, Automatic, 0 GHz

Get Canon DP-V3120 PDF manuals and user guides View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

OSD Menu Network/IMD Settings Sub Menu 84 LAN Configure an IP Address Display Subnet Mask Wi-Fi Control Infrastructure Password Access Point SSID Frequency Channel Password Web Control User ID Password Setting Options (Bold: factory default) Configures video display's network settings. • Cannot be set when [Power on Setting] is [User 1] to [User 3]. Automatic Manual [Automatic]: Configures an IP address automatically with DHCP/Auto IP. [Manual]: Configure an IP address and subnet mask manually. 192.168.0.1 255.255.255.0 This is used to connect the video display to a network using Wi-Fi and control it from an external control device. ( 21) Infrastructure Access Point Off Sets the Wi-Fi connection method. [Infrastructure]: This method connects to Wi-Fi via an access point. [Access Point]: This device acts as an access point, and this method connects the device directly to the Wi-Fi device. Sets the access point to connect to. At factory settings, the access point to connect to is not configured. You may specify a password if needed by using up to 24 alpha-numerical characters and symbols. The default password is blank. Configures the access point. Enter the SSID. This can be set using up to 24 alpha-numerical characters and symbols. 2.4 GHz, 5.0 GHz Sets the communication mode. When [2.4 GHz] 1 to 13 (increments of 1) When [5.0 GHz] 36, 40, 44, 48 Sets the channel to use for communication. Enter the password. This is set using between 8 and 24 alpha-numerical characters and symbols. Remember to change the default password. The default password is the serial number. The serial number is the individual 12-digit number assigned to your product, and can be checked on the [System Information] screen. Settings for operating this device remotely using a Web browser. ( 23) On, Off Set whether or not to receive control signals from an external device, connected using network connection or Wi-Fi connection, in order to operate the video display remotely from the device's web browser. Enter the user ID. This is set using up to 16 alpha-numerical characters and symbols. The default user ID is [user]. Enter the password. This is set using between 8 and 16 alpha-numerical characters and symbols. The default password is the serial number. The serial number is the individual 12-digit number assigned to your product, and can be checked on the [System Information] screen.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
OSD Menu
84
Network/IMD Settings
Sub Menu
Setting Options (Bold: factory default)
LAN
Configures video display's network settings.
• Cannot be set when [Power on Setting] is [User 1] to [User 3].
Configure an IP
Address
Automatic
Manual
[Automatic]: Configures an IP address automatically with DHCP/Auto IP.
[Manual]: Configure an IP address and subnet mask manually.
Display
192.168.0.1
Subnet Mask
255.255.255.0
Wi-Fi
This is used to connect the video display to a network using Wi-Fi and control it from an external
control device. (
21)
Control
Infrastructure
Access Point
Off
Sets the Wi-Fi connection method.
[Infrastructure]: This method connects to Wi-Fi via an access point.
[Access Point]: This device acts as an access point, and this method
connects the device directly to the Wi-Fi device.
Infrastructure
Sets the access point to connect to. At factory settings, the access point
to connect to is not configured.
Password
You may specify a password if needed by using up to 24 alpha-numerical
characters and symbols. The default password is blank.
Access Point
Configures the access point.
SSID
Enter the SSID. This can be set using up to 24 alpha-numerical characters
and symbols.
Frequency
2.4 GHz,
5.0 GHz
Sets the communication mode.
Channel
When [2.4 GHz]
1
to 13 (increments of 1)
When [5.0 GHz]
36, 40,
44
, 48
Sets the channel to use for communication.
Password
Enter the password. This is set using between 8 and 24 alpha-numerical
characters and symbols.
Remember to change the default password. The default password is the
serial number. The serial number is the individual 12-digit number assigned
to your product, and can be checked on the [System Information] screen.
Web
Settings for operating this device remotely using a Web browser. (
23)
Control
On,
Off
Set whether or not to receive control signals from an external device,
connected using network connection or Wi-Fi connection, in order to
operate the video display remotely from the device's web browser.
User ID
Enter the user ID. This is set using up to 16 alpha-numerical characters
and symbols. The default user ID is [user].
Password
Enter the password. This is set using between 8 and 16 alpha-numerical
characters and symbols. The default password is the serial number. The
serial number is the individual 12-digit number assigned to your product,
and can be checked on the [System Information] screen.