Canon DP-V3120 Video Display Operation Guide - Page 75
Set [System Settings], Camera Information
![]() |
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Sub Menu Fan On, Off Camera Information Automatic On Off OSD Menu Setting Options (Bold: factory default) Allows you to link stopping the fan to the camera's recording operation (For Cinema EOS cameras, Canon professional-use video cameras, or ARRI cinema cameras that are compatible with this video display). Set [System Settings] [Fan Control] to [On] to enable the fan to be 75 stopped and then set [Fan] to [On] to stop the fan whenever the camera starts recording. At room temperature (25 °C), the fan remains off for approximately one minute*. The fan operates at a faster speed than usual before and after the fan is stopped to lower the internal temperature. * Max of about 6 minutes when using DC power Max of about 10 minutes when using DC power • If the temperature inside the main unit increases while the fan is off, the message [Fan will be rotated as the temperature is high.] is displayed and the fan starts rotating approximately ten seconds later. Since the temperature of the main unit has increased, the fan rotates faster than usual. • The video display's fan may start rotating before the camera recording starts due to the temperature increase inside the main unit. • If the message [Invalid operation due to high temperature.] is displayed, the fan cannot be stopped even when [On] is selected for this item. Wait until the internal temperature lowers. However, the fan may not stop in some conditions, for example when used at a high temperature. Sets conditions to display camera information. [Automatic]: Camera information is displayed for 4 seconds when the information has changed. [On]: Camera information is always displayed. [Off]: Camera information is not displayed.
![](/manual_guide/products/canon-dpv1711-video-display-operation-guide-57ee8f1/75.png)