Canon DP-V3120 Video Display Operation Guide - Page 81
Automatic, ITU-R BT.709, Switches between On and Off for [2020 Outside of Gamut View].
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
OSD Menu Sub Menu Peak Range Range 2020 Outside of Gamut View1 Enable Color Gamut Range Monochrome2 Blue Only2 Red Off2 Green Off2 Blue Off2 Backlight Scan Compare View1 Enable Type Setting Options (Bold: factory default) When [Range Check 1] When [Over Range] [Automatic] Automatic, Off Displays video in monochrome and the specified high-luminance areas are When [Range Check 2] shown as tinted. Automatic, Off 81 [Automatic]: When [Gamma/EOTF] [SMPTE ST 2084 (PQ)] or [Hybrid Log-Gamma], the high-luminance range part is colored. • When a function is executed while [Automatic] is selected, the screen enters [Single Input Dual View] mode. -5 to 5 (0) When [Peak Range] [Automatic] Sets the area of the high-luminance range part to be colored. (Increments of 1) When [Picture Mode] or [Color Gamut] [ITU-R BT.2020] Displays video in monochrome, with the areas where the color gamut exceeds the selected color gamut shown in red. On, Off Switches between On and Off for [2020 Outside of Gamut View]. ITU-R BT.709 Native Sets the [Color Gamut] to be set as out of color gamut. 0 to 512 (0) Sets the range when tinting dark areas. (1 increments) 0: Tints all dark areas. 512: Dark areas at the set values or less are not tinted. On, Off Video is displayed in monochrome. On, Off Cuts red and green signals, and displays only blue signals in monochrome. On, Off • [Blue Only] cannot be set when [CDL/User LUT] is a setting other than [CDL 1-8] or [Off]. Video is displayed with red signals cut. On, Off Video is displayed with green signals cut. On, Off Video is displayed with blue signals cut. High, Low, Off [Backlight Scan] partially turns off the backlight area and reduces the image hold period when displaying images. Images having different image quality settings are displayed on the left and right screens for comparison. (When [Picture Mode] for left and right screens is the same) • When a signal with a resolution of 2K or smaller is displayed on a single screen, changes to [Single Input Dual View]. • When [HDR/SDR] is selected for [Type] and [Enable] is set to [On], [Boost Contrast] becomes [On]. On, Off Sets Comparison mode On or Off. Automatic HDR/SDR CDL/User LUT Automatic HDR/SDR CDL/User LUT Luminance Sets the type of the image to compare. [Automatic]: [HDR/SDR] when [Adjustment] [CDL/User LUT] is [Off], otherwise set at [CDL/User LUT]. [HDR/SDR]: HDR and SDR images are displayed. [CDL/User LUT]: The image on which [CDL] or [User LUT] is applied is displayed only in the left screen. [Luminance]: Displays an image with a different luminance.