Canon DP-V3120 Video Display Operation Guide - Page 50
Code, and Camera Information are displayed. Camera Information is, OSD Menu, Sub Menu, Setting Options
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
OSD Menu Sub Menu Format 50 Audio Input Marker/TC/CameraInfo Input Setting Options SDI Signal Automatic 4:2:2 YCbCr 10-bit 4:2:2 YCbCr 12-bit 4:4:4 YCbCr 10-bit 4:4:4 YCbCr 12-bit 4:2:2 ICtCp 10-bit 4:2:2 ICtCp 12-bit 4:4:4 ICtCp 10-bit 4:4:4 ICtCp 12-bit 4:4:4 RGB 10-bit 4:4:4 RGB 12-bit 4:4:4 XYZ 10-bit 4:4:4 XYZ 12-bit HDMI Signal Automatic 4:4:4 XYZ 12/10-bit Sets the color format and gradation. [Automatic]: Sets automatically to match the input signal. • The HD-SDI signal is either [4:2:2 YCbCr 10-bit] or [4:2:2 ICtCp 10-bit]. • When [Input Configuration] [HD/SD-SDI], the setting is fixed to [4:2:2 YCbCr 10-bit]. • When [Input Configuration] [3G-SDI RAW], the setting is fixed to [Automatic]. • If [Automatic] is selected, they are rendered in a Payload that is selected in the order A → B → C → D. • The settings for correctly displaying ICtCp format signals are as follows. -- [Picture Mode]: [ITU-R BT.709] or [ITU-R BT.2020] -- [Color Gamut]: [ITU-R BT.709] or [ITU-R BT.2020] -- [Gamma/EOTF]: [SMPTE ST 2084 (PQ)], [Hybrid Log-Gamma] or [Hybrid Log- Gamma RGB] • If you need to use the ICtCp format for SDI signals, select any of the following to match the signal: [4:2:2 ICtCp 10-bit], [4:2:2 ICtCp 12-bit], [4:4:4 ICtCp 10-bit], [4:4:4 ICtCp 12-bit] • To use 4:4:4 XYZ 10-bit for SDI signals, select [4:4:4 XYZ 10-bit]. Then, signals will be processed as signals where XYZ data is included in RGB data output in 4:4:4 RGB 10-bit format. [Select Input Signal] When [Quad Input] Automatic, Input A, Input B, Input C, Input D When [Dual Input A,B] Automatic, Input A, Input B When [Dual Input C,D] Automatic, Input C, Input D Sets the audio terminal. [Automatic]: Sets automatically to match the input signal. • For [Select Input Signal] [Automatic] or [Single Input], it is fixed at [Automatic]. [Select Input Signal] When [Automatic] or [Quad Input] Input A, Input B, Input C, Input D When [Dual Input A,B] Input A, Input B When [Dual Input C,D] Input C, Input D Set the target terminal so that various markers (except Grid Marker), Time Code, and Camera Information are displayed. (Camera Information is available in the [Multi View (Quad)] display only) • This setting becomes invalid except for the [Multi View (Quad)] or [Multi View (Dual)] display.