Canon DP-V3120 Video Display Operation Guide - Page 31
Dim Surround]: Enables Dim Surround process specified by ACESproxy. - 31
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
OSD Menu Sub Menu Color Range Automatic Full SDI Full (4-1019) Limited When [Color Range] [Compatible] ( 89) Automatic Full (0-1023) SDI Full (4-1019) Limited 1 (64-940) Limited 2 (64-1023) Input Transform Automatic Off Output Transform ITU-R BT.709 ITU-R BT.2020 DCI-P3 Output Transform Surround Dim Surround Dark Surround Setting Options (Bold: factory default) Sets the quantization range. [Automatic]: Sets the range based on signal information automatically. 31 • Setting is disabled when [ACESproxy (ver. 1.0.1)] is selected for [Picture Mode]. • Operations when [Automatic] is selected are described below. -- It is set in accordance with the settings if Color Range settings are included in the camera metadata. When there is [Full Range] metadata in Payload when SDI is selected, it will be set to [SDI Full]. -- When HDMI is selected, [Full] or [Limited] ([Full (0-1023)] or [Limited 1 (64-940)]) is set automatically depending on HDMI signal information. -- When SDI is selected, the setting is configured according to the settings for [Picture Mode], [Color Gamut], and [Gamma/EOTF] ( 41). • Operations when [Format] is set to [ICtCp] are described below. -- When [Color Range] is set to other than [Full], [Wave Form Monitor] will display only a signal set with [Color Range]. -- If [Channel Settings] [Picture Mode] [Type] is [L/R], the right screen's [Color Range] setting for the following will be the same as set for the left screen: - When displaying a single terminal's input in full-screen - When displaying [2 Sample Interleave] or [Dual Link 3G-SDI] signals When [Picture Mode] [ACESproxy (ver. 1.0.1)] Sets whether to apply ACES Input Transform to the [3G-SDI RAW] signal ( 48). [Automatic]: Applied automatically. [Off]: Not applied. When [Picture Mode] [ACESproxy (ver. 1.0.1)] [ITU-R BT.709], [ITU-R BT.2020], [DCI-P3]: ACESproxy is converted into respective mode. When [Picture Mode] [ACESproxy (ver. 1.0.1)] [Dim Surround]: Enables Dim Surround process specified by ACESproxy. [Dark Surround]: Enables Dark Surround process specified by ACESproxy.