Canon DP-V3120 Video Display Operation Guide - Page 88
On]: The message [No Signal, Turn off power by Power Save function.] is
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
OSD Menu Sub Menu Setting Options (Bold: factory default) Power Indicator/Button LED Settings Power Indicator Off 88 Brightness 1 to 5 (3) Display Button LED On, Off Adjusts the brightness of the power indicator on the main unit. The greater the number, the higher the brightness. Sets the F buttons and the lamp on the face. On, Off (Luminance Warning On), Off [Off (Luminance Warning On)]: When [Peak Luminance Control] is set to [On], the F button assigned with this function will flash when display luminance is restricted, while the other F buttons and the lamp on the face will go out. Button Name Lighting Always, 60, 30, 10, 5 Time (sec.) Sets the time (sec) until the lamp on the face goes out, if no operation is performed. Power Save On, Off [Always]: The lamp on the face is always lit. Automatically turns off video display's power supply when there is no video signal input. [On]: The message [No Signal, Turn off power by Power Save function.] is displayed when there is no signal input for approximately 30 minutes. Approximately 5 minutes later, the message will read [No Signal, Turn off power.] and the power will be turned off. Sets the operation of internal fan. Fan Settings Fan Control On, Off Fan Stop On, Off Fan noise can be eliminated when the main unit is used during shooting or when silent operation is needed. Set this in advance to stop the fan either manually or by linking it with the camera during shooting ( 75). When this is set to [On], the mode changes so that the fan can be stopped. The fan sometimes rotates faster than usual before stopping. If [Fan Stop] is set to [On] and when [Fan Control] is set to [On], the fan can be stopped. At room temperature (25 °C), the fan remains off for approximately one minute*. The fan operates at a faster speed than usual before and after the fan is stopped to lower the internal temperature. * Max of about 6 minutes when using DC power Max of about 10 minutes when using DC power • If the temperature inside the main unit increases while the fan is off, the message [Fan will be rotated as the temperature is high.] is displayed and the fan starts rotating approximately ten seconds later. Since the temperature of the main unit has increased, the fan rotates faster than usual. • Select [Off] to restart the fan. The fan rotates faster than usual. • If the message [Invalid operation due to high temperature.] is displayed, the fan cannot be stopped even when [On] is selected for this item. Wait until the internal temperature lowers. However, the fan may not stop in some conditions, for example when used at a high temperature.