Canon DP-V3120 Video Display Operation Guide - Page 51
K/2K]: Sets [Picture Mode] by individual 4K or 2K signal screen
![]() |
View all Canon DP-V3120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
OSD Menu Sub Menu Internal Sync Channel Name Picture Mode Type [Type] When [Normal] Picture Mode When [L/R] Picture Mode L Picture Mode R When [4K/2K] Resolution 4K, 2K When [Automatic] Resolution 4K, 2K Payload UHD/PQ, UHD/HLG, UHD, 709/PQ, 709/HLG, 709, VANC, Unknown Camera CINEMA EOS SYSTEM, ARRI, VARICAM On, Off Setting Options When [Image Division] [Square Division] Sets whether to synchronize four inputs. [On]: Force synchronization. 51 [Off]: Do not force synchronization. Sets the name of the selected channel. You can input up to 16 alphanumeric characters. Set [Picture Mode] by individual channel. Normal L/R 4K/2K Automatic [Normal]: Sets one [Picture Mode]. [L/R]: Sets [Picture Mode] by individual left and right screen. Displays as [Single Input Dual View] when using resolutions of 2K or lower. [4K/2K]: Sets [Picture Mode] by individual 4K or 2K signal screen. [Automatic]: [Picture Mode] is set according to the SDI signal. The set [Picture Mode] is changed to in the order camera metadata → Payload → resolution (4K/2K). SMPTE-C EBU ITU-R BT.709 ITU-R BT.2020 Adobe RGB DCI-P3 User 1 (2020 PQ) User 2 (2020 HLG) User 3 (DCI PQ) User 4 (DCI PQ D65) User 5 ~ User 7 CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1) - (Not set) Set the [Picture Mode] for each screen. [ACESproxy (ver. 1.0.1)]: Can be set when [Type] is [Normal]. [-] (Not set): Cannot automatically change image quality to suit input signal. Can be set when other than [Resolution 4K] and [Resolution 2K] are selected in [Type] [Automatic]. • Colorimetry Bit/Transfer Characteristics of the SDI Payload ID supports the signal in conformity with the following standard. SMPTE ST 2082-10:2018 (12G-SDI) SMPTE ST 2081-10:2018 (6G-SDI) SMPTE ST 425-1:2017 (3G-SDI Single Link / Square Division) SMPTE ST 425-3:2019 (3G-SDI Dual Link(2SI) ) SMPTE ST 425-5:2019 (3G-SDI Quad Link(2SI) ) SMPTE ST 292-1:2018 (HD-SDI) • Settings that can be set differ according to the input signal. -- [Input Configuration] [HD/SD-SDI]: [Type] is fixed to [Normal]. [Automatic] cannot be set. -- [Input Configuration] [3G-SDI RAW] and [HDMI]: [4K/2K] and [Automatic] cannot be set in [Type]. • When [Type] is [L/R] -- Setting the same [Picture Mode] for both left and right screens will cause [Picture Mode] in the non-selected screen to change to a different mode (for example, the [Picture Mode] settings of the left and right screens are switched). -- When using a signal 2K or under, it is fixed at [Single Input Dual View].
![](/manual_guide/products/canon-dpv1711-video-display-operation-guide-57ee8f1/51.png)