Canon FS-4 User Guide - Page 21
Manual Recording
![]() |
View all Canon FS-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Manual Recording Before recording, make sure both the video camera and the FS-4 are powered on and connected with the FireWire cable. Step 1: Step 2: Set your video camera to "Camera" or "Cam" mode. Make sure you can see an image through the viewfinder. On the FS-4, press the Record key. This sets the FS-4 to RECORD-PAUSE mode. Record Key Stop Key Step 3: On the FS-4, press the Record key a second time. The FS-4 begins to record. The timecode value is displayed on the screen. Step 4: Press the Stop key to put the FS-4 into RECORD-PAUSE mode. Step 5: Press the Record key, the FS-4 begins to record again on the same clip. Step 6: Press the Stop key twice to stop the recording. Step 7: Press the Record key again to begin recording a new clip. When in Record mode if you want to break the recording into a new, separate file without dropping frames, press Record and a new clip is automatically created. CAUTION: Never disconnect the power or the FireWire cable during a recording. This will cause file corruption. 17
![](/manual_guide/products/canon-fs4-user-guide-380a78b/21.png)