Canon PowerShot SX30 IS PowerShot SX30 IS Camera User Guide - Page 111
Changing the Image Quality
View all Canon PowerShot SX30 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Changing the Image Quality You can choose between three image quality settings. Choose the image quality setting. ● After pressing the m button, press the op buttons to choose . Image Quality Table Choose an option. ● Press the qr buttons or turn the  dial to choose an option, then press the m button. X The option you set will appear on the screen. Image Quality (Recording Pixels/Frame Rate) Content 1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies. 640 x 480 pixels, 30 frames/sec. For shooting standard quality movies. Since the number of recording pixels is smaller than 320 x 240 pixels, 30 frames/sec. in , the image quality will appear coarse, but you can record approximately three times the length. Estimated Shooting Time Memory Card Capacity Image Quality 4 GB 20 min. 43 sec. 43 min. 43 sec. 1 hr. 58 min. 19 sec. 16 GB 1 hr. 24 min. 54 sec. 2 hrs. 59 min. 3 sec. 8 hrs. 4 min. 30 sec. • Based on Canon's testing standards. • Recording will automatically stop when the clip file size reaches 4 GB, or when the recording time reaches 29 minutes and 59 seconds when shooting in , and approximately 1 hour when shooting in or . • Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 4 or higher memory cards are recommended. In and when the recording pixel setting for still images is set to , a gray frame will appear around the area that can be shot as a still image. 111