Canon PowerShot SX30 IS PowerShot SX30 IS Camera User Guide - Page 168
Using an Externally Mounted Flash Sold Separately
View all Canon PowerShot SX30 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Using an Externally Mounted Flash (Sold Separately) You can make your flash photography even better with the use of a Speedlite EX series flash (sold separately). • You should set the white balance to h. • Please also read the Speedlite series manual included with the flash. • When a Speedlite EX series flash is mounted, you cannot set the built-in flash. • Some functions on Speedlite 270EX, 430EX II, and 580EX II cannot be used with this camera. • When using Canon brand flashes other than Speedlite EX series models, the flash may not fire correctly, or may not fire at all. Flashes with a manual firing function can be used in manual mode, however redeye correction is not available. • Using a non-Canon brand flash (particularly a high-voltage flash) or flash accessories may inhibit normal operation or damage the camera. Attach the case for the hot shoe cap to the strap. ● Remove the strap from the camera. ● Pass the strap through the back of the case. ● Attach the strap to the camera (p. 13). Remove the hot shoe cap. ● Push ( ) and lift ( ) the cap to remove it. ● To avoid losing the cap when you remove it, place it in the case you attached to the strap. Attach the flash to the hot shoe. 168