Canon PowerShot SX30 IS PowerShot SX30 IS Camera User Guide - Page 139
Trimming
View all Canon PowerShot SX30 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Trimming You can cut out a portion of a recorded image and save it as a new image file. Trimming Area Trimming Area Display Recorded pixels after trimming Choose [Trimming]. ● Press the n button to choose [Trimming] in the 1 tab, then press the m button. Choose an image. ● Press the qr buttons or turn the  dial to choose an image, then press the m button. Adjust the trimming area. X A frame will appear around the portion of the image to be trimmed. X The original image will display in the upper left and the trimmed image will display in the lower right. ● If you move the zoom lever to the left or right, you can change the frame size. ● If you press the opqr buttons, you can move the frame. ● If you press the l button, you can change the frame orientation. ● In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by turning the  dial. ● Press the m button. Save as a new image and display. ● Follow Steps 4 and 5 on p. 138. • Images recorded at a pixel setting of or (p. 75), or images resized to (p. 138) cannot be edited. • The width and height ratio of an image that can be trimmed is fixed at 4:3. • The number of recorded pixels in a trimmed image will be smaller than before trimming. 139