Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 111
Set [Marker] to [On]., inner edge of the overlapping area.
View all Canon REALiS LCOS WUX6600Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Installation Guide Special Arrangements Special Arrangements 2 Set [Marker] to [On]. Marker lines are projected on the images. The red marker indicates the start position for adjustment, and the green marker, the end position. Initially, only the red marker is visible when you prepare for edge blending, because it is projected over the green marker. 3 In [Side], select [Start position] and use the [ ] / [ ] buttons to move the start marker to the outer edge of the overlapping area. Do this for each edge; on the top, bottom, left, and right. 4 Select [Width] and use the [ ] / [ ] buttons to move the end marker to the inner edge of the overlapping area. Do this for each edge; on the top, bottom, left, and right. Blending area Start marker End marker 109