Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 91
Setting Up the Network, Displaying the Network Configuration Screen
View all Canon REALiS LCOS WUX6600Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Connection Procedure ■ Setting Up the Network Displaying the Network Configuration Screen 1 Turn on the computer and projector. Network functions are not available until about 40 seconds after the projector is plugged in. 2 Launch a web browser, enter "http://(projector IP address)" in the address bar, and press the Enter key. The projector web screen appears. Installation Guide Connection Procedure The following information is displayed. Projector control Displays the projector control screen. Settings Projector name Comment MAC address (Wired) IP address (Wired) MAC address (Wireless) IP address (Wireless) Shows the settings screen. The name of the projector on the network Relevant notes, such as where the projector is installed MAC address of the wired LAN IP address of the wired LAN (IPv4) MAC address of the wireless LAN IP address of the wireless LAN (IPv4) PowerStatus Filter time Alert The power status of the projector Air filter operating time Error message (if an error has occurred) Temperature abnormality Light source abnormality Faulty air filter unit Faulty cooling fan Faulty power supply Faulty lens The factory default IP address is "192.168.254.254" for wired connections (IPv4) and "192.168.253.254" for wireless connections (IPv4). If DHCP settings are used, ask the network administrator for the projector IP address. It is possible to check the IP address from the projector menu (P185). 89