Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 215

Projector Web Screen Menu Setting PJLink [PJLink] From [PJLink] in the settings screen, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, see "Network Setting" (P91). For information about PJLink, see "What is PJLink?" (P194). Menu Guide Projector Web Screen Menu Item PJLink PJLink authentication Password Confirm password Notify 1 Notify 1 IP Address Notify 2 Notify 2 IP Address Explanation Turn the PJLink function on or off. If [OFF] is selected, the other settings in this screen cannot be configured. Select whether to turn the PJLink authentication function on or off. If [OFF] is selected, it is not possible to change the following items. [Password] [Confirm password] Enter the PJLink authentication password in 1-byte alphanumeric characters (1 - 32 characters). For confirmation, enter the same password that you entered in [Password]. Specify whether to send spontaneous state notification. Choosing [OFF] will prevent you from configuring [Notify 1 IP Address]. If [Notify 1] is [ON], specify the IP address to receive notification. Configure for notification to multiple recipients. If [Notify 2] is [ON], specify the IP address to receive notification. Factory default setting ON ON system system OFF OFF 213