Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 160

Menu Description Submenu Marker Reset Function Show the blending area markers. Option Off On Function Hide the blending area markers. Show the blending area markers. The start marker is red, and the end marker is green. Reset the marker settings. Correct image distortion by aligning corners of the blending area with the image from the reference projector. For multi-projection alignment, align the corners with the projector blending area (already adjusted) that forms the basis. Points to adjust Corner adjustment Blending area Left, Right, Top, Bottom Select the direction of the blending area to adjust. As you reposition the corners of the selected area, the overall image changes to match the adjustment. • Sides set to an edge-blending width of 12 or more can be adjusted when [Keystone] is set to [Corner adjustment] and the aspect ratio is [16:10]. • To reset adjustment, use [Keystone] (P152). Lens - Position > [Install settings] > [Lens - Position] The projector can save information about the lens position in memory. Up to three sets of lens information (including focus, zoom, and lens shift settings) can be saved, and the lens can be restored to these positions. Submenu Load position 1 - 3 Save position 1 - 3 Function Restores the lens to the positions saved using Save position 1 - 3. Saves the lens position as Save position1 - 3. Restores the lens to the preset position. Lens shift reset • The preset position differs depending on the type of lens. • The preset position also changes when the orientation of the projector is changed, due to the ceiling mounted setting, etc. Example: [+50%, 0%] > [-50%, 0%] 158