Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 55
Projecting a Test Pattern from the Menu, Specifying Power-Saving Settings, Light source mode
View all Canon REALiS LCOS WUX6600Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Basic Guide Convenient Projection Features Convenient Projection Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see "Test pattern" (P160) or "Adjustment Using a Test Pattern" (P107). Specifying Power-Saving Settings Set power-saving settings as needed. The following four settings are available. For details, refer to the page describing each function. • Light source mode (P147) Conserve energy by selecting a mode that is less bright. • Standby power settings (P171) Conserves energy in standby mode by disabling some network functions. • Power management mode (P171) Automatically turns off the light source or the power after a certain period if the projector is idle without an input signal. • Power management duration (P172) Specify the period after which the light source or projector should go off automatically if left idle without an input signal when [Power management mode] is set to [Light source off] or [Standby]. 53