Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 49
Step 3 Select an Input Signal
View all Canon REALiS LCOS WUX6600Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Basic Guide Projection Procedure Projection Procedure Step 3 Select an Input Signal To switch between signals from connected devices, select an input signal in the [Input] menu. The selected signal changes each time you press the INPUT button, or each time you press the [ ] / [ ] buttons when the [Input] window is shown. The currently active input signal is marked with a green circle and enclosed by a orange border. Names of input signals available for projection are displayed in white, and unavailable signal names are grayed out. Projector Remote control INPUT button INPUT button In single-image mode In split-screen mode • [Digital PC] and [Analog PC-1] may be grayed out even when available. • Screens of computers connected to the projector over a network can be projected when you have selected [LAN] as the input signal. For details, refer to the NMPJ user's manual. • Images on USB flash drives can be projected when you have selected [USB] as the input signal. For details, see "Projecting Images on a USB Flash Drive" (P56). • In split-screen mode, the side without control rights is identified by a white circle. • Input signals can also be selected by using the INPUT A-C buttons on the remote control, depending on settings. For details, see "[INPUT A-C] button settings" (P168). 47