Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 157

Menu Description Marginal focus In dome projection, image focus can be adjusted on the edges of the screen, and the remote control can be used to activate and deactivate this focus adjustment. For detailed instructions, refer to "Adjusting Peripheral Focus" (P74). Option Function Off Disable remote focusing of image edges. Enable remote focusing of image edges. To access the adjustment On window, press the LENS button on the projector twice or press the FOCUS button on the remote twice. Reset Restore edge focusing to the standard position. • The marginal focus feature is not available depending on the type of lens installed. • Setting this function to [Off] only prevents display of the adjustment window. Adjustment values are still retained. Use this setting to prevent remote focusing of image edges. Edge blending Brightness and colors of overlapping edges of images from multiple projectors, which form a blending area, can be adjusted for a more seamless appearance. For detailed instructions, see "Projecting from Multiple Projectors at Once (Edge Blending)" (P108). Option Function Off Disable blending. Adjust Display the menu for blending area adjustment. Start marker End marker Blending area When adjusting the image projected from the right side • Adjustment may not eliminate different colors or brightnesses in the blending area. • For best edge-blending results, use all projectors in the same image mode and make the following adjustments. (1) Brightness, contrast, R/G/B gain and offset, black level, blending color, color temperature, color level, color balance, sharpness, and gamma (P141) (2) Color adjustment, by using 6-axis color adjustment (P146) (3) Gamma adjustment, by using fine-tune gamma (P146) (4) Corner adjustment, by using keystone correction (P152) Menu Guide Menu Description 155