Canon REALiS LCOS WUX6600Z WUX7000Z WUX6600Z WUX5800Z Users Manual - Page 113
Matching Black in the Overlapping Area
View all Canon REALiS LCOS WUX6600Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Installation Guide Special Arrangements Special Arrangements Matching Black in the Overlapping Area In overlapping projection, dark colors are projected with less intensity than other colors in the overlapping area. You can make this overlapping area less distracting by adjusting the black level of non-overlapping image areas. Left image Right image Area where dark colors look lighter Position of end marker (hidden) Here, the non-overlapping image area (from the end marker toward the center of the image) is called area "D." D-area Blending area Normally, three areas are identified in the context of end markers: A, B, and C. In the following instructions, only area D is adjusted, and the widths of A, B, and C are left at the default value of 0. To prepare for adjustment, select [System settings] > [User screen settings] > [No signal screen] > [Black], start projection with no input signal, and turn off the room lights, so that you can check dark image areas. 1 Select [Install settings] > [Professional settings] > [Edge blending] > [Adjust] > [Black level adjustment] > [Adjust]. 2 Select [Adjustment type] > [Black level]. 3 After selecting [D-area base], as you watch the image, adjust the values so that the brightness and colors of the blending area and area D match. 4 Repeat this adjustment on all projectors. 111