Canon SX50 Realis Command Codes - Page 18
Commands, REMOTE, Function, Parameter, Response, Description, Example
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Commands REMOTE Function Switch to Remote mode Mode Control Setting Reference Parameter None Response An "i:OK" is returned after switching to the mode is successful. Description This switches to Remote mode. (1) During Remote mode, all buttons are disabled except for the front panel and remote control POWER button. (2) In Local mode, this command can be used in any projector state. (3) If a REMOTE command is received for switching to Remote mode while power management is in standby, the Power On (lamp on) state is activated unconditionally. (4) Except for RC and MAIN, the control commands can be used in Remote mode only. (RC and MAIN can be used in Local mode only.) (5) The following projector modes and settings are all canceled when this command is executed. • Digital zoom • Presentation timer display • Spotlight display • Screen temporary off (NoShow) • Freeze image (Freeze) • Commands being executed (6) The current mode can be viewed with the GET command. Example Mode switching > REMOTE < i:OK Mode viewing > GET MODE or ?MODE < g:MODE=LOCAL *Commands are indicated by ">", and responses are indicated by "