Canon SX50 Realis Command Codes - Page 25
This adjusts the horizontal and vertical position on the screen., g:VPOS=8
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Commands HPOS VPOS Function Horizontal and vertical position adjustment Mode Control Setting Reference Parameter Adjustment value The RANGE command can be used to obtain the parameter range that can be set at that time. Number Response An 'i:OK' is returned after setting is successful. Description This adjusts the horizontal and vertical position on the screen. (1) This command is identical to the Horizontal position and Vertical position functions under the [Input signal settings] in the [Display settings] menu. (2) The GET command can be used to retrieve the current horizontal and vertical position. Example Setting > HPOS=12 < i:OK This sets the horizontal value to 12. Reference > GET VPOS or ?VPOS < g:VPOS=8 Obtain settable parameter range (Min, Max) > RANGE HPOS < r:HPOS=N,0,820 *Commands are indicated by ">", and responses are indicated by "