Canon SX50 Realis Command Codes - Page 37

Commands WBRGB Function Screen color correction (ADJUST) Mode Control Setting Reference Parameter RGB setting value (Each value -20 to 20) ∇∇ Number The RANGE command can be used to obtain the parameter range that can be set at that time. Response An 'i:OK' is returned after setting is successful. Description This sets the RGB adjustment values of the screen color correction. (1) Although this setting is enabled when Adjustment (ADJUST) is selected by the Screen color correction command (WB), it can be made independently. (2) This command is identical to the Adjust function under Screen color correction in the Image adj. menu. (3) With this command, the R, G, and B values can be set in a single operation. (4) This sets the currently selected input signal and image mode. (5) The GET command can be used to retrieve the current RGB adjustment values. Example Setting > WBRGB=10, 11, 12 < i:OK This sets R to 10, G to 11, and B to 12. Reference > GET WBRGB or ?WBRGB < g:WBRGB=-10, 0, 19 This retrieves the RGB adjustment values. Obtain settable parameter range (Min, Max) > RANGE WBRGB < r:WBRGB=N,-20,20,-20,20,-20,20 *Commands are indicated by ">", and responses are indicated by "