Canon SX50 Realis Command Codes - Page 9

4.Command System The command system for SX50 "User Commands" is shown below. Mode change Switch to Remote mode REMOTE Switch to Local mode LOCAL Setting/Control Display setting Input signal switching Input signal setting INPUT Input signal selection SEL Screen setting ASPECT Auto PC AUTOPC Menu display position setting User screen setting Flip display IMAGEFLIP Total number of dots adjustment Tracking adjustment Horizontal/Vertical position adjustment Horizontal/Vertical resolution adjustment DOTS TRACK HPOS/VPOS PIX * User commands use only automatic selection of input signals. *Running of Auto PC will change the values set in "Input signal selection". User screen registration User image position Input when no signal Screen when nothing shown Startup screen LOGOPOS NOSIG NOSHOW PJON Image adjustment Image quality select IMAGE *This is set for each input signal and image quality. System setting Image adjustment reset RESET Terminal setting Power management Electronic sound Key lock Password registration Password setting Remote control setting Language setting Reset TERMINAL PMM BVOL KEYLOCK RCCH LANG RESET Brightness setting Contrast setting Sharpness setting Gamma correction Dynamic gamma Progressive Screen color correction Color saturation setting Hue setting Advanced color correction Lamp mode setting BRI CONT SHARP GAMMA DGAMMA PROG WB SAT HUE ACADJUST LAMP RGB adjustment 6-axis adjustment (R to Y) RESET SYSTEM Remote control/Key Power supply Input switching Keystone Auto PC Spotlight Volume adjustment Digital zoom Image quality select Audio mute Display screen setting when nothing shown Freeze image Presentation timer setting POWER INPUT VKS/HKS AUTOPC AVOL IMAGE MUTE NOSHOW Emulate Remote control emulate RC Key emulate BTN Reference Retrieve each data Setting range request RET RANGE *Running of Auto PC will change the values set in "Input signal selection". *Same as "Setting/Control"-"Image Adjustment"-"Image Quality Select". * Indicates functions that are available in the menu but not available in the user commands. WBRGB 6AXR TO Y