Canon SX50 Realis Command Codes - Page 43

Commands RESET Function Reset Parameter Parameter Meaning LAMPTIME Lamp on time reset IMAGE Current image adjustment reset SYSTEM Initial system settings ALL Factory shipping settings Mode Control Setting Reference ID Response An 'i:OK' is returned when the reset process is successful. If something other than a normal response of "i:OK" is returned, the internal state is uncertain. Description This resets the projector settings. ■ Reset of lamp on time (1) The counter indicating the lamp replacement period is reset. (2) This command is identical to the Reset function under Lamp counter in the System settings menu. (3) Execute this command after replacing the lamp. ■ Reset of current image adjustment (1) The adjustment settings of the currently-selected image mode are initialized. (2) This command is identical to the Reset function in the Image adj. menu. * If there is an input signal, the image adjustment items are initialized and then the adjustment values are optimized for the signal. ■ Reset of system settings (1) The following items are initialized. ・ Image Adjustment items (Full Image mode) ・ Execution of initial settings * For details, refer to "Reset Items" in the appendix. ■ Factory shipping settings (1) The following items are initialized. ・ Image Adjustment items (Full Image mode) ・ Execution of initial settings ・ Input source ← A-RGB2 ・ Language ← English * For details, refer to "Reset Items" in the appendix. ■ Notes (1) The power must never be turned off while this command is being executed! (2) After the execution of initial settings, turn off the power and restart the projector. Example Setting > RESET LAMPTIME < i:OK This resets the lamp on time. *Commands are indicated by ">", and responses are indicated by "