Canon SX50 Realis Command Codes - Page 3
Overview
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
1. Overview These specifications describe the methods of controlling the SX50 projector from the PC over an RS-232C connection. Virtually all operations possible with the remote control can be controlled from the PC. The following symbols are used in these specifications. Symbol Description △ Space with 0 or more characters (20h), Tab (09h), or other separator □ Space with 1 or more characters (20h), Tab (09h), or other separator ▽ Separator between parameters ,|□ [ ] The data in [ ] can be omitted. | Same as OR := The definition name is on the left side of this mark, and the definition description is on the right side.
1. Overview
These specifications describe the methods of controlling the SX50 projector from the PC over an RS-232C connection.
Virtually all operations possible with the remote control can be controlled from the PC.
The following symbols are used in these specifications.
Symbol
Description
△
Space with 0 or more characters (20h), Tab (09h), or other
separator
□
Space with 1 or more characters (20h), Tab (09h), or other
separator
▽
Separator between parameters
,|
□
[ ]
The data in [ ] can be omitted.
|
Same as OR
:=
The definition name is on the left side of this mark, and the
definition description is on the right side.