Canon SX50 Realis Command Codes - Page 41

Commands, 6AXR TO Y, Function, Parameter, Response, Description, Example

Get Canon SX50 - REALiS SXGA+ LCOS Projector PDF manuals and user guides
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Commands 6AXR TO Y Function 6-axis adjustment: R to Y hue/color saturation setting Mode Control Setting Reference Parameter Setting values for hue and color saturation (-20 to 20) ∇ Number The RANGE command can be used to obtain the parameter range that can be set at that time. Response An 'i:OK' is returned after setting is successful. Description This sets the 6-axis adjustment of the hue and color saturation for R to Y. (1) Although this setting is enabled when 6-axis correction (6AX) is selected with the Advanced Color Adjustment command (ACADJUST), it can be made independently. (2) This command is identical to the 6-axis color adjust function under Advanced color adjustment in the Image adj. menu. (3) This sets the currently selected input signal and image mode. (4) The GET command can be used to retrieve the current color adjustment values. Example Setting > 6AXR=-8, 5 < i:OK The R hue is set to -8, and the color saturation is set to 5. Reference > GET 6AXR or ?6AXR < g:6AXR=12, -8 This retrieves the R hue and color saturation. Obtain settable parameter range (Min, Max) > RANGE 6AXC < r:6AXC=N,-20,20 *Commands are indicated by ">", and responses are indicated by "

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Commands
6AXR TO Y
Mode
Control
Setting
Reference
Function
6-axis adjustment: R to Y hue/color saturation setting
Parameter
Setting values for hue and color saturation (–20 to 20)
Number
<Hue value: Number>
∇
<Color saturation: Number>
The RANGE command can be used to obtain the parameter range that can be set at that time.
Response
An 'i:OK' is returned after setting is successful.
Description
This sets the 6-axis adjustment of the hue and color saturation for R to Y.
(1)
Although this setting is enabled when 6-axis correction (6AX) is selected with the Advanced Color
Adjustment command (ACADJUST), it can be made independently.
(2)
This command is identical to the 6-axis color adjust function under Advanced color adjustment in
the Image adj. menu.
(3)
This sets the currently selected input signal and image mode.
(4)
The GET command can be used to retrieve the current color adjustment values.
Example
Setting
> 6AXR=–8, 5
The R hue is set to –8, and the color saturation is set to 5.
< i:OK
Reference
> GET 6AXR or ?6AXR
This retrieves the R hue and color saturation.
<
g:6AXR=12, –8
Obtain settable parameter range (Min, Max)
> RANGE 6AXC
< r:6AXC=N,–20,20
*Commands are indicated by “>”, and responses are indicated by “<”.
Supported Command States
Power supply
Input
Mode
OFF
ON
PM
D-RGB
A-RGB1
A-RGB2
Comp
Video
S-Video
None
Remote
Local
×
○
×
○
○
○
○
○
○
○
○
×
※
If a state is not supported, “INVALID_MODE” or “NOT_POWER_SUPPLIED” is returned with the Err response.
※
When the power supply state is in the process of switching, an “i:BUSY” reply may be sent.