Canon SX50 Realis Command Codes - Page 53
Commands, LOGOPOS, Function, Parameter, Response, Description, Example
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Commands LOGOPOS Function User image position setting Mode Control Setting Reference Parameter Parameter Meaning UPPER_L Upper left UPPER_R Upper right CENTER Center ID LOWER_L Lower left LOWER_R Lower right The RANGE command can be used to obtain the parameter range that can be set at that time. Response An 'i:OK' is returned after setting is successful. Description This sets the logo display position. (1) This command is identical to the Logo position function under User screen settings in the Display settings menu. (2) This setting cannot be made unless the user screen is registered beforehand. (The error "e:1002 NO_LOGO_CAPTURED" is returned.) (3) The GET command can be used to retrieve the current display position. Example Setting > LOGOPOS=UPPER_R < i:OK This sets the logo display position to the upper right. Reference > GET LOGOPOS or ?LOGOPOS < g:LOGOPOS=LOWER_L This retrieves the logo display position. Obtain settable parameters > RANGE LOGOPOS < r:LOGOPOS=I,UPPER_L,UPPER_R,CENTER,LOWER_L,LOWER_R *Commands are indicated by ">", and responses are indicated by "