Canon SX50 Realis Command Codes - Page 40
Commands, ACADJUST, Function, Parameter, Response, Description, Example
UPC - 013803046830
View all Canon SX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Commands ACADJUST Function This performs advanced color correction. Mode Control Setting Reference Parameter Parameter Meaning NOCORRECT No correction MEM_L Low memory color correction MEM_M Medium memory color correction ID MEM_H High memory color correction 6AX 6-axis adjustment The RANGE command can be used to obtain the parameter range that can be set at that time. Response An 'i:OK' is returned after setting is successful. Description The advanced color correction method is set by selecting from "No correction", "Low to High memory color correction", and "6-axis adjustment". (1) This command is identical to the Advanced color adjustment function in the Image adj. menu. (2) For 6-axis color adjust, use the separate 6-axis correction R to Y color balance and color level settings commands (6AXR to 6AXY) to set the hue and color saturation for each axis. (3) This sets the currently selected input signal and image mode. (4) The GET command can be used to retrieve the current color compensation method. Example Control > ACADJUST=MEM_M < i:OK The color correction is set to "Medium memory color correction". Reference > GET ACADJUST or ?ACADJUST < g:ACADJUST=6AX This retrieves the color correction method. Obtain settable parameters > RANGE ACADJUST < r:ACADJUST=I,NOCORRECT,MEM_L,MEM_M,MEM_H,6AX *Commands are indicated by ">", and responses are indicated by "