Canon imageFORMULA DR-2510M Workgroup Scanner Reference Guide - Page 22

Starting [Scan First] with the Job Button Under default settings, [Scan First] is assigned to the first job button on the scanner. When you press job button 1 after placing your document in the scanner, CaptureOnTouch starts up and [Scan First] begins. When document scanning is finished, the output method selection screen appears. Perform the procedure from step 5 onward to output the scanned images. Job button Scan First CaptureOnTouch Scanner Settings CaptureOnTouch provides the following settings for configuring scan conditions. [Color mode] Select the mode for scanning documents (auto color detection, color, grayscale, or black and white (binary)). [Page Size] Specify the page size of documents. [Orientation] Specify the orientation in which documents are fed into the scanner (portrait or landscape). [Dots per inch] Specify the scanning resolution. [Scanning Side] Specify whether to scan only one side of a document or both sides. If you select [Skip blank page] and a blank page is detected within the document while scanning, the blank page is skipped. [Deskew] When a document is scanned at an angle, the slant is detected and straightened in the scanned image. [Text orientation recognition] The orientation of text in scanned images is detected, and the images are rotated to match the orientation of the text. [Use advanced settings dialog box] Open the TWAIN driver settings screen, and configure advanced scan conditions. For details on the settings in the driver settings screen, refer to the Help. (Click the [Help] button in the settings screen to open the Help.) IMPORTANT Certain settings are found in both the TWAIN driver settings screen and the CaptureOnTouch scanner settings. If you clear the [Use advanced settings dialog box] check box after configuring TWAIN driver settings, the CaptureOnTouch scanner settings are enabled. 18