Canon imageFORMULA DR-2510M Workgroup Scanner Reference Guide - Page 35

Power Supply (using AC adapter) DC 16 V, 1.0 A Power Consumption Scanning: Maximum 16 W In the Sleep mode: Maximum 1.8 W (AC 220-240 V: 1.9 W) With power switch OFF: Maximum 0.5 W Noise Not more than 66 dB Operating Environment Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH AC Adapter (100 to 240 V type) Model Number MG1-4315 Input Output Weight AC 100 to 240 V, 50/60 Hz, 65 VA to 82 VA DC 16 V, 1.8 A Approximately 0.3 kg (including power cord) Replacement Parts Exchange roller kit (product code: 2445B001) This kit includes replacement feed and retard roller assemblies, and a replacement document pressure guide. • For details on replacing the parts, see "Replacing Consumables" on p. 26. • Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts. Product specifications are subject to change without notice. FCC REGULATIONS (For 120 V model) Document Scanner, Model M11074/M11073 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success NY 11042, U.S.A. Tel. No. (516)328-5000 RADIO INTERFERENCE REGULATIONS (For 120 V models) This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of the Industry Canada. RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120 V models) Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: "Appareils Numériques", NMB-003 édictée par l'Industrie Canada. MODEL NAMES Model DR-2010M is identical to model M11074. Model DR-2010M is the sales name of model M11074. Model DR-2510M is identical to model M11073. Model DR-2510M is the sales name of model M11073. 31