Canon imageFORMULA DR-6030C DR-6030C User Manual - Page 75
Dots per inch, Scanning Side, Simplex], Duplex], Skip Blank
View all Canon imageFORMULA DR-6030C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 3 • When scanning a page with a dark area at the left or right edge • When scanning a glossy or reflective document • When the brightness setting is incorrect • When Custom setting is selected in the Gamma Settings dialog box ☞ Depending on the application program, operation may become unstable when [Auto-detection] is enabled. In that case, [Auto-detection] should be disabled. Dots per inch Select the scanning resolution. ☞ Higher resolutions provide clearer images, but produce larger files. ☞ When the selected resolution is 300 dpi or less, the [Moire Reduction] setting is enabled to allow reduction of Moire patterns in scanned images. ☞ When the selected resolution is 400 or 600 dpi, the [Image Quality] setting is enabled. Scanning Side Select which page side(s) to scan. [Simplex] Scan only the front (top) side of documents loaded at the feeder inlet. [Duplex] Scan both sides of documents. [Skip Blank Page] As each document page is scanned, its scanned image is judged as to whether it is blank, and if so, the image is not saved. ☞ Selecting [Skip Blank Page] enables the [Setting] button, which opens the [Blank Skip Setting] dialog box. ☞ Adjust the [Content density] setting in the [Blank Skip Setting] dialog box if blank pages are not skipped, or if non-blank pages are skipped. Software Setup 69