Canon imageFORMULA DR-6030C DR-6030C User Manual - Page 77
Image Quality, Scan Options] TWAIN driver only, Area] Button, Speed Priority], Image Quality Priority]
View all Canon imageFORMULA DR-6030C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 3 Image Quality When 400 or 600 dpi resolution is selected, you can enable this and select either [Speed Priority] or [Image Quality Priority Image]. [Speed Priority] This mode gives priority to scanning speed, and generates 400 or 600 dpi images from images scanned at 300 dpi. Although scanning speed is fast, image quality is slightly reduced. [Image Quality Priority] This mode gives priority to image quality, and scans at 600 dpi. When 400 dpi resolution is selected, 400 dpi images are generated from images scanned at 600 dpi. ☞ Scanning with 24-bit Color is disabled when [Image Quality Priority] is selected. Also, an error may be displayed with some combinations with other settings, in which case [Speed Priority] should be selected, or other settings changed. [Scan Options] (TWAIN driver only) Specify operation when scanning continuously with a TWAIN-compatible application. [Standard image] Eject a scanned page before scanning the next page. [Scan Ahead] Scan pages continuously, so scanning speed is faster than [Standard image]. [Scan Single Page] The [Scanning Side] setting on the [Basic] tab sheet becomes [Simplex], and one page is scanned. When [High Quality Moire Reduction] is selected while Page Size is set to [Auto-detection], Mode is set to [24-bit Color], and Scanning Side is set to [Duplex] all at the same time, a portion of the document may not be scanned due to insufficient memory on the scanner. If this occurs, lower the image quality by selecting [Speed priority], or change the Scanning Side setting to [Simplex]. [Area] Button Open the [Scan Area] dialog box to specify the area to scan. (See "[Scan Area] Dialog Box," on p. 73.) The [Area] button is not displayed if the application program provides its own function to specify scan area. Software Setup 71