Canon imageFORMULA DR-6030C DR-6030C User Manual - Page 85
Reverse Image] Check Box TWAIN driver only, Punch Hole Removal] Check Box
View all Canon imageFORMULA DR-6030C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
[Reverse Image] Check Box (TWAIN driver only) The document is scanned with black and white reversed when scanning in black and white (binary) mode. [Edge Emphasis] Adjusts image contours. Move the slider toward Soft to soften image contours, or toward Sharp to sharpen image contours. [Document Orientation] This setting selects an angle (0, 90, 180 or 270 degrees) to rotate scanned images for orientation normalization. ☞ Scanned images are rotated as follows according to the orientation of loaded documents and the selected rotation angle. Feeder documents: face up Image rotation (clockwise) 0° Flatbed documents: face down 90° 180° 270° [Text Orientation Recognition] Check Box Select this check box to detect text orientation in scanned images, and rotate images in 90º increments as needed to normalize orientation. Chapter 3 ☞ When [Text Orientation Recognition] is selected, [Image Rotation] and area settings in the Scan Area dialog box are disabled. ☞ Some application programs do not support [Text Orientation Recognition]. Please disable [Text Orientation Recognition] if your application program behaves abnormally when it is enabled. [Erase Dot] Check Box Select this to remove isolated black pixels (3×3 dots or smaller) from a white background, or isolated white pixels from a black background. [Border Removal] Check Box Select this to remove black borders surrounding scanned images. [Punch Hole Removal] Check Box Select this to remove the black spots from scanned images when scanning documents with punch holes. ☞ If punch holes are located within text or graphics in the document, they may be misidentified as graphics, and may not be removed. Software Setup 79