Canon imagePROGRAF PRO-2000 series User Manual - Page 121

roll holder Side holder stopper Side 4. Insert paper core, which is for winding roll paper, into roll holder. Important • We recommend using a paper core that is wider than the paper to be wound when winding paper. If you use a narrower paper core, use with a gap between the holder stopper and the paper. • Always use a paper core for winding that is the same thickness or is thicker than the roll paper's paper core. If you use a paper core that is thinner, it may affect take up. 5. Insert holder stopper from left into roll holder as shown, and then while holding in position (B), push firmly until holder stopper flange (A) touches roll paper. Lift holder stopper lever (C) from shaft to lock. 6. Change Roll Holder Lock switch on roll unit to release direction. 121