Canon imagePROGRAF PRO-2000 series User Manual - Page 81

• If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection. This may create a wider bottom margin, in some cases. Cut rolls manually in the following cases: Eject (when the paper surface is being scratched / to wait for ink to dry) Important • When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, printed documents may be damaged. • Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quality or cause rough cut edges. Note • Once the following step has been performed, the procedure can be started from step 7 the next time. • Printing the second and subsequent times • Printing after replacing with the same type of paper 1. Tap paper settings display area on Home screen of touch screen. Note • If the Home screen does not appear, tap the Home button. 81