Canon imagePROGRAF PRO-2000 series User Manual - Page 351

Preparing to Transfer the Printer To protect the internal parts in transit, always follow these steps before transferring the printer to a new location. For details on packing the printer and installing it after transfer, see "Reinstalling the Printer." Important • Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit. Note • The maintenance cartridges needs to be replaced when you execute the Prepare to transportation menu. Prepare the maintenance cartridge in advance while referring to the table below. The number of maintenance cartridge required varies depending on the amount remaining in the maintenance cartridge being used. • If you can move the printer in a level state using casters or something similar, you do not need to execute Prepare to transportation. • Always follow the instructions of the service representative when preparing to transfer the printer. Prepare to transportation Menu Usage Examples Transport and Storage In Low Temperature Environments Permitted Angle of Inclination Required Maintenance Cartridges Move indoors on Move indoors by carry- No the same floor ing All directions: with- 1-3 in 30° Move indoors to a Moving the printer No different floor while temporarily tilting it such as when using the stairs All directions: with- 1-3 in 90° Transport outdoors Transport By Vehicle Yes All directions: with- 3 in 90° Remove paper 1. Remove the paper. • Rolls Removing the Upper Roll from the Printer Removing the Lower Roll from the Roll Unit (Option) • Sheet Removing Sheets 351