Canon imagePROGRAF PRO-2000 series User Manual - Page 260

Automatic Adjustment to Straighten Lines and Colors If printed vertical lines are warped or colors are out of alignment, execute Print head alignment and adjust the print head alignment. Choose from Auto (standard) or Auto (fine) for automatically adjusting the print head. Minor warping and misaligned colors can usually be improved by executing Auto (standard). If there is no improvement, perform Auto (fine). When you execute Auto (standard) or Auto (fine), the adjustment pattern is printed, and the print head position is adjusted based on the printing result automatically. Important • This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film. • If adjustment is not possible as expected using special paper, try another type of paper or try Manual adjustment. Manual Adjustment to Straighten Lines and Colors Note • Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of paper as you will use for printing. • To change the paper type or for more beautiful color borders, perform Auto (standard). • To ensure clear quality and when replacing the print head, perform Auto (fine) to fine-tune the position between nozzles and colors. To ensure high-quality printing, we recommend that you execute Auto (fine). Items to Prepare When Using Rolls An unused roll at least 10.00 in (254.0 mm) wide When Using Sheets Auto (standard): Three sheets of unused paper, A4/Letter size or larger (or one sheet when using A2 or larger) Auto (fine): Five sheets of unused paper, A4/Letter size or larger (or one sheet when using A2 or larger) Perform adjustment as follows. 1. Load paper. Loading Rolls on the Roll Holder 260