Canon imagePROGRAF PRO-2000 series User Manual - Page 525

Quality & Media This dialog allows you to create a basic print setup in accordance with the paper type. Unless special printing is required, normal printing can be performed just by setting the items in this dialog. Media Type Select the type of media to be used. You must select the type of media actually loaded in the printer. This selection enables the printer to carry out printing properly for the material of the media used. Note • If is displayed, start up the Canon IJ Printer Utility3 and either correct or update media information. Paper Source Select the source from which paper is supplied. Roll Paper (Auto) Depending on the paper settings on the printer driver and the paper information registered to the printer, the printer automatically determines which roll paper to use and then feeds that paper. Roll 1 Paper is fed from Roll 1. Roll 2 Paper is fed from Roll 2. Cut Sheet Feeds paper using the cut paper. Print Quality Select the one that is closest to the original document type and the purpose. When one of the radio buttons is selected, the appropriate quality will be set automatically. Highest Prints with quality as the highest priority. 525