Canon imagePROGRAF PRO-2000 series User Manual - Page 800
Fit Roll Paper Width, Print with the loaded paper., Cancel, Replace the paper and print
View all Canon imagePROGRAF PRO-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 800 highlights
4910 Cause The width of the roll paper set in Fit Roll Paper Width in the printer driver is not the same as the width of the roll paper loaded in the printer. What to Do Tap OK on the touch screen to go to the next screen. Check the media type and size that appear and tap OK. • Printing without changes Tap Print with the loaded paper. on the touch screen. However, note that this error may cause paper jams and affect the printing quality. • Stopping printing Tap Cancel on the touch screen to stop printing. • Replacing the roll paper Follow the steps below to replace the paper with roll paper of the width set in the printer driver. 1. Tap Replace the paper and print on the touch screen, then remove the roll paper. Removing the Upper Roll from the Printer Removing the Lower Roll from the Roll Unit (Option) Removing Rolls From the Roll Holder 2. Replace the paper with paper of the width set in the printer driver. Loading Rolls on the Roll Holder Loading the Upper Roll on the Printer Loading the Lower Roll on the Roll Unit (Option) Printing begins. Note • To change print settings in Windows, select Fit Roll Paper Width in the printer driver and set the roll paper width in the dialog box that appears. • To change print settings in Mac OS, open the printer driver and select Fit Roll Paper Width, and then set the roll paper width in that panel to the width of the paper loaded in the printer. 800