Canon imagePROGRAF PRO-2000 series User Manual - Page 125

Outward Winding Inward Winding Important • Secure the left and right edges of the roll paper with tape within 1.97 inches (50 mm) of the edges so that neither end of the roll paper lift up. • When rewinding heavyweight paper, use strong adhesive tape to fasten it. Otherwise, a rewinding problem may result. • If you use a paper core narrower than the paper to be wound, adjust the position of the holder stopper, so that there is a gap between the holder stopper and the paper. 5. Make sure the leading edge of the roll paper is not lifting up from the paper core, and if there are places lifting up, tape in additional places so that the paper does not lift up. 6. Push roll holder downward, check that roll holder is not lifting up, and tap OK. Outward Winding Inward Winding Important • If the roll holder lifts up, it may cause an error. 7. To stabilize operations when starting taking up, advance roll paper with operation panel and wind roll paper approximately one revolution. (See "Feeding Roll Paper Manually.") 8. Push roll holder downward again, and check that roll holder is not lifting up. 125