Canon imagePROGRAF PRO-2000 series User Manual - Page 231
Printing Network Settings
View all Canon imagePROGRAF PRO-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Printing Network Settings Use the operation panel to print the printer's current network settings. Important • The network settings printout contains important information about your network. Handle it with care. 1. Make sure printer is turned on. 2. Load plain paper. Loading Rolls on the Roll Holder Loading the Upper Roll on the Printer If you use sheets, load at least 10 sheets (A4 or Letter-sized). Loading Sheets in the Printer 3. Flick HOME screen and tap Menu Operations The menu screen appears. Device settings. 4. Tap Test print. If you specify the administrator password, enter the password. 5. Tap Print LAN details. The printer starts printing network settings information. Note • You can also print the printer's network settings. Tap Device settings on the HOME screen, tap LAN settings and Confirm LAN settings in this order, and then tap Print LAN details and tap Yes. The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.) Item Description Setting LAN Setting Basic setting information - Basic Info IPv4 setting information (Wired LAN) - LAN Interface Mode Current interface Wired/Wireless/AP Mode/WFD Mode Link Active Operation status Inactive/Active IP Address IPv4 IP address XXX.XXX.XXX.XXX 231