Canon imagePROGRAF PRO-2000 series User Manual - Page 97
Lower release lever and close top cover.
View all Canon imagePROGRAF PRO-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
noise is distracting, try moving the paper over slightly to the left or right (up to 0.039 in / 1 mm) while keeping it parallel to the paper alignment line. • The suction remains on for about 30 seconds during loading. If you cannot finish loading a sheet during this time, pull the sheet away and reinsert it to start the suction again. 4. Lower release lever and close top cover. • If a print job was received Tap OK to feed the paper and begin printing. • If no print job was received A menu for selecting the media type appears. Select the media type loaded and tap OK. The printer now starts feeding the paper. Note • For details on media types that you can select, see "Paper Information List." 97
noise is distracting, try moving the paper over slightly to the left or right (up to 0.039 in / 1 mm)
while keeping it parallel to the paper alignment line.
•
The suction remains on for about 30 seconds during loading. If you cannot finish loading a sheet
during this time, pull the sheet away and reinsert it to start the suction again.
4.
Lower release lever and close top cover.
•
If a print job was received
Tap
OK
to feed the paper and begin printing.
•
If no print job was received
A menu for selecting the media type appears.
Select the media type loaded and tap
OK
.
The printer now starts feeding the paper.
Note
•
For details on media types that you can select, see "Paper Information List."
97