Canon imagePROGRAF PRO-2000 series User Manual - Page 60
Roll Holder Lock
View all Canon imagePROGRAF PRO-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Important • If the leading edge of the roll paper is secured with tape or a paper band so that it will not unravel, remove the tape or paper band before loading the roll paper into the roll holder slot. If you load the paper into the roll holder slot with the leading edge secured, only part of the roll paper is fed to the paper feed slot, resulting in damage to the roll paper. Note • For the procedure for attaching the roll paper to the Roll Holder, see "Loading Rolls on the Roll Holder." 6. Change Roll Holder Lock switch on roll unit to locked position. 7. Change feed flap switch on top of roll unit to feed icon position on the left. 60
Important
•
If the leading edge of the roll paper is secured with tape or a paper band so that it will not unravel,
remove the tape or paper band before loading the roll paper into the roll holder slot.
If you load the paper into the roll holder slot with the leading edge secured, only part of the roll
paper is fed to the paper feed slot, resulting in damage to the roll paper.
Note
•
For the procedure for attaching the roll paper to the Roll Holder, see "
Loading Rolls on the Roll
Holder
."
6. Change
Roll Holder Lock
switch on roll unit to locked position.
7.
Change feed flap switch on top of roll unit to feed icon position on the left.
60