Canon imagePROGRAF iPF6450 Basic Guide - Page 110
Paper is not cut neatly, Paper is not cut, Depression on the leading edge is left, Margins are wide
View all Canon imagePROGRAF iPF6450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Paper is not cut neatly iPF6450 Paper is not cut neatly Cause The paper is bent or curled at the cut position. Paper rises by the ends of the cut position before it is cut. You are using paper that cannot be cut with the Cutter Unit. Cut Speed is not configured correctly in the Control Panel menu. During cutting, printed documents fall out at an angle. Corrective Action Straighten out any curling by the edges of the paper. Reload the paper correctly. Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a cutting tool to cut the roll after printing. (See "Specifying the Cutting Method for Rolls.") →User's Guide Change the Cut Speed setting in the Control Panel menu. (See "Menu Structure.") →P.66 In the Control Panel menu, set Cutting Mode to Eject. Hold documents after printing, as they are cut. (See "Specifying the Cutting Method for Rolls.") →User's Guide Paper is not cut Cause The printed document became caught on a foreign object by the Output Tray, which lifted the document. The Cutter passed under the paper. In the printer driver, No or Print Cut Guideline is specified in Automatic Cutting. In the Control Panel menu, Cutting Mode is set to Eject or Manual. Corrective Action Remove the foreign object by the Output Tray to enable the printer to eject the printed document, keeping it level. Specify Yes in Automatic Cutting in the printer driver. If the Cutting Mode is Eject, press the Cut button to cut the paper. If the Cutting Mode is Manual, cut rolls with scissors or the like. Depression on the leading edge is left Cause Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading edge. Corrective Action When printing quality is most important, we recommend setting TrimEdge Reload to On or Automatic so that the paper edge is automatically cut before printing. (See "Menu Structure.") →P.66 Margins are wide Cause Corrective Action Rolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection. This operation is normal. Troubleshooting Problems Regarding Paper 110 Basic Guide